|
 
Condensate and Steam Fired
Water Heating Equipment
Tank Type |
Copper Finned |
Storage Tank
Pre-Plumbed |
Water Treatment | Odd Water
Standard Equipment
-
Hamilton ships all of it's steam water heating packages with more
than just the minimum controls required to do the job. We provide
the highest quality float and thermostatic steam traps and self
contained steam control valves as well as wye strainers preceding
each control group. We supply (2) steam traps to eliminate the leading
cause of steam control failure: water logged steam lines feeding
the control. The first steam trap is ahead of the steam control
and the second is after the primary heat exchanger. All storage
tanks 200 gallons or less are glass lined, insulated and jacketed.
Options -
Air or electrically operated
steam control valves. Cold water pre-heating (condensate cooling) heat
exchangers are available as an integral part of the water heating system
or as a stand alone product. Cement lined storage tanks can be supplied
in lieu of the standard epoxy or glass lined tanks. All tanks 220 gallons
or larger are available with a variety of insulating and jacketing options
and in horizontal configurations.
Product Specification
Literature
| |
The Eliminator - provides up to 405
gallons per hour of 150°F water depending on the model selected.
This system will eliminate the need for a separate water heater
by utilizing the wasted energy from your return condensate and the
excess steam capacity from your steam boiler (if required).
The
Eliminator also eliminates the need for electrical, gas and
flue installations to provide hot water. It virtually eliminates
the problems associated with a gas fired water heater in the typical
dry cleaning plant environment (corrosion of pilot assemblies, troublesome
vent dampers etc...). Utilizing the technology developed for their
larger capacity systems, they have also eliminated the problems
and inefficiencies associated with the steam injection, steam to
water mixing valves and single coil style water heating systems.
This family of our product line begins with The Eliminator
which is available in eight different stock models. |
Product Specification Literature
Hamilton High Efficiency Vertical Steam Boilers
|
|
Tubeless Design - This unique, patented
design allows for a smooth, obstruction free steam side surface
and results in higher efficiency, less costly maintenance and
longer service life. The solid metal heat-ductors on the fire
side provide ample heating surface to keep efficiencies at 80%
or above. There are no internal flue tubes as with other brands
of steam boilers to burn out or scale up. Your Hamilton boiler
will be producing steam at its rated efficiency long after other
brands have been replaced or re-built!
Controls/Safeties - Hamilton ships
all of its steam boilers with more than just the minimum controls
required for local code. Our standard controls include the following
in our base price:
• combination water level control
and low water cut-off
• auxiliary low water cut-off
• operating pressure control
• high limit pressure control
• two blow-off valves
• main burner gas valve
• thermocouple style safety pilot
• safety pressure relief valve
• steam gauge
• water gauge set
• gauge glass protector
• draft diverter
• control panel
|
Options
- If overall finished height is
a problem, Hamilton offers an optional horizontal draft diverter on
its atmospheric models 7 - 20 H.P. lowering the equipment height by
6" - 12" (installed differences may be greater depending on clearances
required by local code). Other options include a night operating pressure
switch (normally for high pressure operations), time clock and electronic
ignition systems.
Hamilton High Efficiency HRT Steam Boilers
Horizontal Return Tubular (HRT) Design
- This design incorporates 10 square feet of heating surface per
boiler horsepower for higher efficiency, quicker, drier steam
and longer service life. Using this much heating surface lowers
the surface temperature of the internal flue tubes which greatly
reduces or even eliminates scaling while substantially extending
service life. Lower stack temperatures than our typical competitor's
design indicate a much higher efficiency at 80% or above. Your
Hamilton boiler will be producing steam at its rated efficiency
long after other brands have been replaced or re-built!
Controls/Safeties
- Hamilton
ships all of it's steam boilers with more than just the minimum
controls required for local code. Our standard controls include
the following in our base price:
• combination water level control
and low water cut-off
• auxiliary low water cut-off
• operating pressure control
• high limit pressure control
• two blow-down valves
• main burner gas valve
• thermocouple style safety pilot
• safety pressure relief valve
• steam gauge
• water gauge set
• gauge glass protector
• draft diverter
• control panel
|
Options
- Your Hamilton HRT boiler
can be ordered with a bolt on, removable base as well as a horizontally
terminated stack connection if site dimensions are a problem. Additional
openings in the boiler shell allow for field changing of the water level
and other controls to the opposite side. Other options include night operating
pressure switch (normally for high pressure operations), time clock and
electronic ignition systems.
Hamilton Electric Steam & Hot Water Boilers
Horizontal Design
- This design
incorporates the best method for insuring long, efficient element
life: a minimum of 4" of "mud" clearance below heating element(s).
The horizontal design also delivers quicker, drier steam because
of a larger steam release area than competitor's vertical "box"
styles. The entire outer shell of the boiler is insulated with
2 inches of thermafibre felt, minimizing jacket losses. Your Hamilton
boiler will be producing steam or hot water at peak efficiency
long after other brands have been replaced or re-built!
Controls/Safeties - Hamilton
ships all of its steam boilers with more than just the minimum
controls required for local code. Our standard controls include
the following in our base price:
• combination water level control
and low water cut-off
• auxiliary low water cut-off
• operating pressure control
• high limit pressure control
(hot
water boilers supplied with aqua stats)
• two blow-down valves
• magnetic contactors
• internal circuit fusing
• safety pressure relief valve
• steam gauge
• water gauge set
• gauge glass protector
• control panel
|
Options
- Your Hamilton horizontal electric
boiler can be ordered in 200, 208, 240, 346, 380, 400, 480, 550 and
575 voltages, in either 50 or 60 hz. Control transformers, 115 volt,
can also be provided if only the operating voltage is available. Other
options include a night operating pressure switch (for normally high
pressure operations), time clock and electronic staging sequence control
systems.
Home
|